BMW 3 SERIES E36 316 318 320 325i 328 M3 STAINLESS BRAIDED BRAKE LINES HOSES UI

Posted on June 30, 2022 by admin | Comments Off

BMW 3 SERIES E36 316 318 320 325i 328 M3 STAINLESS BRAIDED BRAKE LINES HOSES UI

MLR STAINLESS STEEL BRAIDED BRAKE PIPE SET. 6 Line Set (2 Fronts & 4 Rears). BMW E36 3 Series (all 6 line models). (Not Suitable For Rear Drum Brake – 4 Line Models). BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Brakes & Brake Parts\Brake Hoses, Lines & Fittings”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Performance Part: Yes
Country/Region of Manufacture: United Kingdom
End Fitting Type: Female Threaded, Male Threaded
Material: Stainless Steel
Grade: 303/304 Stainless Steel
Type: Hose
Features: Protective Sleeve Attached, PTFE Lined, Reinforced, Rust-Resistant
Manufacturer Part Number: MLR.UI
Classic Car Part: No
Finish: Metallic
Universal Fitment: No
Placement on Vehicle: Front, Left, Rear, Right
Brand: MLR
Manufacturer Warranty: 1 Year
Items Included: Brake Line, Grommet, Hose

mocal

Mocal Classic Vw Beetle Type 1 Stainless Steel Braided Brake Lines Hoses Pipes

Posted on April 7, 2022 by admin | Comments Off

Mocal Classic Vw Beetle Type 1 Stainless Steel Braided Brake Lines Hoses Pipes

STAINLESS STEEL BRAIDED BRAKE PIPE SET. 4 Line Set (2 Fronts & 2 Rears). Beetle 1.2 automatic/manual 1954 – 1977. Beetle 1.3 1300 & 1300A manual/automatic (front discs) 1965 – 1975. Beetle 1.3 1303 automatic/manual 1972 – 1975. Beetle 1.6 1302S & 1303S 1970 – 1977. Please Note – Buyers must add message at checkout of full model details, year, engin. E size and colour choice. BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport Use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Brakes & Brake Parts\Brake Hoses, Lines & Fittings”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Performance Part: Yes
Country/Region of Manufacture: United Kingdom
End Fitting Type: Female Threaded, Male Threaded
Material: Stainless Steel
Grade: 303/304 Stainless Steel
Type: Hose
Features: Protective Sleeve Attached, PTFE Lined, Reinforced, Rust-Resistant
Manufacturer Part Number: BHKVW-4-BEE
Classic Car Part: Yes
Finish: Metallic
Universal Fitment: No
Placement on Vehicle: Front, Left, Rear, Right
Brand: Mocal
Manufacturer Warranty: 1 Year
Items Included: Brake Line, Hose

suzuki

Suzuki Swift Sport 1.6 Zc32 Stainless Steel Braided Brake Lines Hoses Pipes Yc

Posted on April 6, 2022 by admin | Comments Off

Suzuki Swift Sport 1.6 Zc32 Stainless Steel Braided Brake Lines Hoses Pipes Yc

MLR STAINLESS STEEL BRAIDED BRAKE PIPE SET. 6 Line Set (2 Fronts & 4 Rears). Swift Sport 1.6 ZC32 2012 – 2017. BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Brakes & Brake Parts\Brake Hoses, Lines & Fittings”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Performance Part: Yes
Country/Region of Manufacture: United Kingdom
End Fitting Type: Female Threaded, Male Threaded
Material: Stainless Steel
Grade: 303/304 Stainless Steel
Type: Hose
Features: Protective Sleeve Attached, PTFE Lined, Reinforced, Rust-Resistant
Manufacturer Part Number: MLR.YC
Classic Car Part: No
Finish: Metallic
Universal Fitment: No
Placement on Vehicle: Front, Left, Rear, Right
Brand: MLR
Manufacturer Warranty: 1 Year
Items Included: Banjo Bolts, Brake Line, Grommet, Washers

corrado

Vw Corrado Vr6 G60 2.0 16v Stainless Steel Braided Brake Lines Hoses Pipes Bwr

Posted on March 9, 2022 by admin | Comments Off

Vw Corrado Vr6 G60 2.0 16v Stainless Steel Braided Brake Lines Hoses Pipes Bwr

MLR STAINLESS STEEL BRAIDED BRAKE PIPE SET. 6 Line Set (2 Fronts & 4 Rears). Corrado 1989 – 1995. Fits directly to the front caliper. BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Brakes & Brake Parts\Brake Hoses, Lines & Fittings”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Performance Part: Yes
Country/Region of Manufacture: United Kingdom
End Fitting Type: Female Threaded, Male Threaded
Material: Stainless Steel
Grade: 303/304 Stainless Steel
Type: Hose
Features: Protective Sleeve Attached, PTFE Lined, Reinforced, Rust-Resistant
Manufacturer Part Number: MLR.BWR
Classic Car Part: Yes
Finish: Metallic
Universal Fitment: No
Placement on Vehicle: Front, Left, Rear, Right
Brand: MLR
Manufacturer Warranty: 1 Year
Items Included: Brake Line, Grommet, Hose, Washers

bending

Bending Brake Sheet Metal Folder / Bender 11.8/300mm 2.0mm- quick EU delivery

Posted on March 20, 2021 by admin | Comments Off

Bending Brake Sheet Metal Folder / Bender 11.8/300mm 2.0mm- quick EU delivery

Sheet Metal Folder / Bending Brake – MBR-300. VAT – total end price for UK customer – GBP 135.00 (including 20% VAT and import duty). PLEASE NOTE – IMPORTANT. Information for customers from England, Scotland and Wales. The purchasing price for products with the price up to GBP 135.00 inclusive. We hope this information will help. Information for customers from Northern Ireland. For our Northern Ireland customers nothing has changed. However, total end price for NI customers must include VAT. Check out our other items. The item “Bending Brake Sheet Metal Folder / Bender 11.8/300mm 2.0mm- quick EU delivery” is in sale since Wednesday, August 2, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “bendingmachinesuk” and is located in Bydgoszcz. This item can be shipped worldwide.

Modified Item: No
Country/Region of Manufacture: Poland
Custom Bundle: No
Machine Type: Brake/Metal Bending Machine
Model Year: 2021
Non-Domestic Product: No
MPN: Does Not Apply
Treated Material: standard steel
Unit Type: Unit
Max Bending Angle: 135 degrees
Brand: REDDEN
Control: Manual

sheet

Sheet Metal Folder Bender Bending Brake Machine 2100mm/1.2 + SLITTER

Posted on March 14, 2021 by admin | Comments Off

Sheet Metal Folder Bender Bending Brake Machine 2100mm/1.2 + SLITTER

Sheet Metal Folder / Bending Brake. Sheet metal folder RG-C 2000/1.2 standard equipped with. Steel springs – facilitate the work of the bending beam, this makes work easier for the operator on the machine. Rear support table – for easy arrangement of the sheet metal in the machine. Protractor – for repeatability of bending angles. PLEASE NOTE – IMPORTANT. Information for customers from England, Scotland and Wales. Since the 01/01/2021 new post-Brexit regulations apply. As the UK is not a part of EU no more, the flow of goods is not the same is it was before Brexit. The purchasing price for products with higher price than GBP 135.00, is. So it excludes VAT. All the export/import costs are included in our price. We hope this information will help. Information for customers from Northern Ireland. For our Northern Ireland customers nothing has changed. However, total end price for NI customers must include VAT. Check out my other items. The item “Sheet Metal Folder Bender Bending Brake Machine 2100mm/1.2 + SLITTER” is in sale since Thursday, June 14, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “bendingmachinesuk” and is located in Bydgoszcz. This item can be shipped worldwide.

Modified Item: No
Country/Region of Manufacture: Poland
Custom Bundle: No
Machine Type: Brake/Metal Bending Machine
Model Year: 2021
Non-Domestic Product: No
MPN: Does Not Apply
Treated Material: Aluminium
Unit Type: Unit
Max Bending Angle: 130
Brand: REDDEN

bending

Bending Brake Sheet Metal Folder / Bender 15.8/400mm 3.0mm + Fast Delivery

Posted on March 3, 2021 by admin | Comments Off

Bending Brake Sheet Metal Folder / Bender 15.8/400mm 3.0mm + Fast Delivery

Sheet Metal Folder / Bending Brake – MBR-400. Important: for sheet metal thickness above 1.5mm to 2.0mm, sheet metal folder must be screwed to the bench. The bench must be assuredly attached to the substrate. For bending 2.0mm steel sheet the extension levers should be used (it may be a pipe or a rectangular profile). The extension levers are not a part of the set. PLEASE NOTE – IMPORTANT. Information for customers from England, Scotland and Wales. Since the 01/01/2021 new post-Brexit regulations apply. As the UK is not a part of EU no more, the flow of goods is not the same is it was before Brexit. The purchasing price for products with higher price than GBP 135.00, is. So it excludes VAT. All the export/import costs are included in our price. We hope this information will help. Information for customers from Northern Ireland. For our Northern Ireland customers nothing has changed. However, total end price for NI customers must include VAT. Check out our other items. The item “Bending Brake Sheet Metal Folder / Bender 15.8/400mm 3.0mm + Fast Delivery” is in sale since Friday, December 13, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “bendingmachinesuk” and is located in Bydgoszcz. This item can be shipped worldwide.

Model: MBR-400/3
Country/Region of Manufacture: Poland
Machine Type: Brake/Metal Bending Machine
Model Year: 2021
MPN: Does Not Apply
Treated Material: Aluminium
Unit Type: Unit
Max Bending Angle: 130
Brand: REDDEN
Control: Manual

sheet

Sheet Metal Folder/ Bender / Bending Brake 3100mm / Quick delivery + VIDEO

Posted on March 2, 2021 by admin | Comments Off

Sheet Metal Folder/ Bender / Bending Brake 3100mm / Quick delivery + VIDEO

Sheet Metal Folder / Bending Brake. See here our Roller shear / Slitter / Cutter which cen be used to cut sheet metal with RG-C folder /bender!! Offered RG-C series machines are produced for over 20 years. Many years of tradition, experience and professionalism, backed up by technical solutions (devices manufactured by CNC Technology) and the use of the best materials to produce them, give reason to believe that the RG-C series sheet metal folders are the most durable and reliable on the market for many years. Highest quality materials used in the manufacture of RG-C series machines, form a massive and stable construction. Which makes work on those devices easy, efficient and safe. See Video on YouTube. PLEASE NOTE – IMPORTANT. Information for customers from England, Scotland and Wales. Since the 01/01/2021 new post-Brexit regulations apply. As the UK is not a part of EU no more, the flow of goods is not the same is it was before Brexit. The purchasing price for products with higher price than GBP 135.00, is. So it excludes VAT. All the export/import costs are included in our price. We hope this information will help. Information for customers from Northern Ireland. For our Northern Ireland customers nothing has changed. However, total end price for NI customers must include VAT. Check out my other items. The item “Sheet Metal Folder/ Bender / Bending Brake 3100mm / Quick delivery + VIDEO” is in sale since Wednesday, August 2, 2017. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “bendingmachinesuk” and is located in Bydgoszcz. This item can be shipped worldwide.

Country/Region of Manufacture: Poland
Machine Type: Brake/Metal Bending Machine
Model Year: 2021
MPN: Does Not Apply
Treated Material: Aluminium
Unit Type: Unit
Brand: REDDEN
Control: Manual

metal

36 in. Metal Brake with Stand metal bender Bend sheet metal, mild steel and stai

Posted on December 5, 2019 by admin | Comments Off

36 in. Metal Brake with Stand metal bender Bend sheet metal, mild steel and stai

Make smooth, precise bends in sheet metal up to 36 in. The adjustable press plate lets you make sharp or round bends up to 120°. Comes with a sturdy wide-base stand that is pre-drilled for bolting to your shop floor. Bends metal up to 36 in. Handles material as thick as 12 gauge sheet metal, 16 to 20 gauge mild steel, 22 gauge stainless steel. Makes bends to 120°. All steel construction with rustproof enamel finish. An additional lift-gate charge may apply. 12 gauge sheet metal, 16 to 20 gauge mild steel, 22 gauge stainless steel. The item “36 in. Metal Brake with Stand metal bender Bend sheet metal, mild steel and stai” is in sale since Friday, September 15, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “catalinatools” and is located in North Hollywood, California. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: Central Machinery
MPN: 766233567
Warranty: Yes
UPC: Does not apply

sheet

Sheet Metal Folder 1000mm Bender 55533 Bending Brake Garage Metal

Posted on November 20, 2019 by admin | Comments Off

Sheet Metal Folder 1000mm Bender 55533 Bending Brake Garage Metal

Alderney, Herm and Sark islands etc. And Isle of Man and Gibraltar and. Sheet Metal Folder 1000mm Manually Operated Sheet Metal Folding Machine 1000 mm. This metal sheet folder is designed for metalworking. It is ideal for workshops, garages, etc. Thanks to the simple but practical design, this machine is very easy to operate, even for an inexperienced user. Thanks to its sturdy and rugged construction, this bending machine is very durable. Sheet Metal Folder Bench Mounting 1000mm. Bench vice mounting sheet metal folder, fitted with mounting plates. Capable of bending up to 1.2mm steel sheet and 1,5mm copper or alu-sheets. Ideal for the small garage or restoration operation. Maximum working width: 1000 mm. Steel Folding capacity: 1.2 mm. Copper /aluminium Folding capacity: 1.5 mm. Maximum bending angle: 120°. Dimensions (lxwxh): 1140 x 110 x 730 mm. 1pcs , Sheet Metal Folder 1000mm. Bench vice picture just for illustration, bench vice is not included. The item “Sheet Metal Folder 1000mm Bender 55533 Bending Brake Garage Metal” is in sale since Monday, October 29, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Bending Machines”. The seller is “toolsdirekt” and is located in Geeste. This item can be shipped to United Kingdom.

MPN: 55533
Treated Material: Stainless Steel
Brand: Unbranded
Control: Manual

Stainless Steel Metal

Tag: brake

BMW 3 SERIES E36 316 318 320 325i 328 M3 STAINLESS BRAIDED BRAKE LINES HOSES UI

Mocal Classic Vw Beetle Type 1 Stainless Steel Braided Brake Lines Hoses Pipes

Suzuki Swift Sport 1.6 Zc32 Stainless Steel Braided Brake Lines Hoses Pipes Yc

Vw Corrado Vr6 G60 2.0 16v Stainless Steel Braided Brake Lines Hoses Pipes Bwr

Bending Brake Sheet Metal Folder / Bender 11.8/300mm 2.0mm- quick EU delivery

Sheet Metal Folder Bender Bending Brake Machine 2100mm/1.2 + SLITTER

Bending Brake Sheet Metal Folder / Bender 15.8/400mm 3.0mm + Fast Delivery

Sheet Metal Folder/ Bender / Bending Brake 3100mm / Quick delivery + VIDEO

36 in. Metal Brake with Stand metal bender Bend sheet metal, mild steel and stai

Sheet Metal Folder 1000mm Bender 55533 Bending Brake Garage Metal