904 Multi Fuel Flexible Flue Chimney Liner. Please Make sure you measure your chimney and then add an additional Metre to give your installer enough length to make minor adjustments. This is a bespoke Item and is non-refundable once uncoiled and tried to be fitted! Solid fuel/ Multi fuel Flexible Chimney Liner. 904 Steel Internal Skin Giving added Protection to the Liner when Burning Corrosive Products of Combustion and with our 904 External Stainless Steel Construction this product is the Best Quality liner on the Market Today. For Use When Burning, wood, gas, oil, Coal, Smokeless Fuel, Coke, Peat. This Product has a Lifetime Manufacturers Guarantee. Manufactured from 0.12mm Thick Stainless Steel on Both Inner and Outer Skin. Flexible Flue Chimney liner is a double skinned flexible flue liner suitable for relining within a masonry chimney. It is classified as a Class ONE flue liner and is suitable for gas, oil, coal, coke, cured dry logs, cured dry peat and multi-fuel, including wood burning appliances where the maximum flue gas temperatures do not exceed 500 degrees C. This product is suitable for smokeless fuels. If the appliance is mainly going to be used to burn wood, and the appliance is not DEFRA approved you should increase the diameter of the Flue Liner to 150mm (providing this will fit in the masonry chimney), as recommended by Building Regulations. Please do not book your builder/installer until your order has been delivered and has been checked by a competent builder/installer as some deliveries do go wrong and we will not compensate for installation engineers time. You can install your flexible liner either from the top or bottom of the brick chimney stack. Whichever way you chose to install the liner, please ensure that you have sufficient clearance around the outside of the liner to ensure the least amount of friction, or possibility of catching any bricks within the chimney stack, does not occur. Ensure the arrows marked on the liner are facing an upward direction (representing the direction of flue gases). You will need two people to install your liner successfully, one at either end of the chimney stack. From the top of the roof, start to push the liner, nose cone first, down the stack. The person at the bottom of the stack should hold the string and take up the slack. Work in tandem to feed the liner down the chimney stack, ensuring you leave enough liner at the bottom to secure your adaptor and enough at the top to secure the top fixings. Please note: The liner should not be fitted directly to the appliance. A short length of either vitreous or 316 stainless steel (preferably with a clean-out door for sweeping) should be fitted from the appliance to the liner adaptor. Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using). Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack. This HETAS approved liner is a flexible twin-skinned stainless steel flue lining with a smooth inner wall. The system has been designed to upgrade existing chimneys which have failed, or for use where the performance is not adequate for modern conditions. The liner complies and is kitemarked to BSI 9001 BSRIA Cert. HETAS approved and compliant with all the relevant British and European standards. S doesn’t have access or can we retain any details of your credit cards. Deliveries can be left by prior arrangement of the customer but no responsibility can be taken by us for any damages if the customer has requested this. Should you wish to cancel an order placed with us please let us know ASAP by Cancelling orders normally incurs no cost unless products have been specially produced for you order. We will advise you of this on cancellation. Cut to measure and Special Manufactured goods are excluded from this clauses and are not returnable. National Chimney Supplies has been established to provide unrivaled Customer Service to the General Public in the UK. A family run operation with 10 Years plus experience of installing Wood burning Stoves and Biomass Boiler’s. For us our Company Message is simple “Treat Every Customer With the respect and Service you would like yourself to receive”. The item “904 Multi Fuel Flexible Flue Chimney Liner” is in sale since Monday, November 2, 2015. This item is in the category “Home, Furniture & DIY\Fireplaces & Accessories\Heating Stoves”. The seller is “national_chimney_supplies” and is located in Sheffield, South Yorkshire. This item can be shipped to United Kingdom.

• Room: Living Room
• Main Colour: Steel
• Country/Region of Manufacture: United Kingdom
• Style: 904
• Material: Metal
• Unit Quantity: Per Metre
• Type: Coal-Burning Stove
• MPN: Does Not Apply
• Unit Type: m
• Brand: Ultraflex