Mocal Toyota Mr2 Mk1 Mk2 Sw20 Stainless Steel Braided Brake Lines Hose Pipes Set

Posted on August 14, 2022 by admin | Comments Off

Mocal Toyota Mr2 Mk1 Mk2 Sw20 Stainless Steel Braided Brake Lines Hose Pipes Set

STAINLESS STEEL BRAIDED BRAKE PIPE SET. 4 Lines (2 Fronts & 2 Rears). MR2 Mk1 (all models) 1984 – 1989. (all models) 1989 – 1999. Please Note – Buyers must add message at checkout of full model details, year, engin. E size and colour choice. BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport Use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Brakes & Brake Parts\Brake Hoses, Lines & Fittings”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Performance Part: Yes
Country/Region of Manufacture: United Kingdom
End Fitting Type: Female Threaded, Male Threaded
Material: Stainless Steel
Grade: 303/304 Stainless Steel
Type: Hose
Features: Protective Sleeve Attached, PTFE Lined, Reinforced, Rust-Resistant
Manufacturer Part Number: BHKTOY-4-MR2
Classic Car Part: Yes
Finish: Metallic
Universal Fitment: No
Placement on Vehicle: Front, Left, Rear, Right
Brand: Mocal
Manufacturer Warranty: 1 Year
Items Included: Brake Line, Hose

mocal

Mocal Toyota Mr2 Mk3 Zzw30 Stainless Steel Braided Brake Lines Hoses Pipes Kit

Posted on July 2, 2022 by admin | Comments Off

Mocal Toyota Mr2 Mk3 Zzw30 Stainless Steel Braided Brake Lines Hoses Pipes Kit

MOCAL STAINLESS STEEL BRAIDED BRAKE PIPE SET. 4 Line Set (2 Fronts & 2 Rears). Mk3 MR2 ZZW30 1999 – 2007. BRAIDED BRAKE HOSES AVAILABLE FOR OTHER MODELS – PLEASE SEE OUR SHOP ITEMS. ADVANTAGES OF STAINLESS STEEL HOSES. No corrosion – full stainless steel construction (hose & fittings). Firmer brake pedal & less travel. Greater resistance to heat. Greater resistance to damage from road debris etc. 303/304 Stainless Steel & Protective PVC Cover. 70°C to 260°C (-158°F to 500°F). 3.5mm (0.138). 7.5mm (0.295). Designed & Manufactured in the U. Due to the different materials used in the manufacture and the intended use (Motorsport) of this product, it may. Be exactly the same pattern (fittings/fixings/brackets etc) as the original rubber & mild steel hoses. Some minor modifications may be required. Designed for Motorsport use. No instructions are included. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. This item is in the category “Wholesale & Job Lots\Automotive”. The seller is “mattyzx” and is located in this country: GB. This item can be shipped worldwide.

Colour: Black
Finish: Metallic
Manufacturer Warranty: 1 Year
Grade: 303/304 Stainless Steel
Type: Hose
Manufacturer Part Number: MLR.MOCALBGH
Unit Quantity: 4 Lines
Country/Region of Manufacture:: United Kingdom
Performance Part: Yes
Brand: Mocal
Universal Fitment: No
Country/Region of Manufacture: United Kingdom

05-15

For 05-15 Toyota Tacoma Truck 2wd/4wd Chrome Bull Bar Push Bumper Grille Guard

Posted on November 27, 2021 by admin | Comments Off

For 05-15 Toyota Tacoma Truck 2wd/4wd Chrome Bull Bar Push Bumper Grille Guard

Welcome to Speed Daddy. FOR 05-15 TOYOTA TACOMA TRUCK 2WD/4WD CHROME BULL BAR PUSH BUMPER GRILLE GUARD. As a safety feature, traditional bars are built to protect the vehicle, which is considered less safe than allowing controlled deformation to absorb kinetic energy during a collision. Modern design of bullbars and roo bars has advanced so a bullbar is design to fit in the front of a vehicle to protect it and its passengers from damage in a collision with objects and animals. Made of Lightweight Polished SUS-304 Stainless Steel for Strength and Durability. Powder Coated mounting Brackets. Protects Vehicle Front End from Minor Impacts. 3 Enlarged Diameter Tubing with Seamless Welding Construction for Extra Reinforcement. Pre-Drilled for Auxiliary Light Mounting. Bolt-On Design with Complete Mounting Kits for Ease of Installation. 1 X Stainless Steel Bull Bar Grille Guard. Hardware as Shown in the Picture Above. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 05-15 TOYOTA TACOMA TRUCK 2WD/4WD CHROME BULL BAR PUSH BUMPER GRILLE GUARD” is in sale since Saturday, May 4, 2013. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Grilles”. The seller is “speed_daddy” and is located in City of Industry, CA. This item can be shipped worldwide.

Brand: Speed Daddy
Placement on Vehicle: Front
Style: Round Tubing
Color: Metallic
Finish: Polished Chrome
Manufacturer Part Number: SDD-BURB030SS
Material: Stainless Steel
Interchange Part Number: SDD-BURB030SS
Superseded Part Number: SDD-BURB030SS
California Prop 65 Warning: This product contains chemicals known to the State.
Instruction Included: Yes
Please Note: Trimming may be Required to Properly Install
Tubing Diameter: 3″

05-20

For 05-20 Toyota Tacoma Double Cab Chrome 3 Side Step Nerf Bar Running Board

Posted on October 16, 2021 by admin | Comments Off

For 05-20 Toyota Tacoma Double Cab Chrome 3 Side Step Nerf Bar Running Board

Welcome to Speed Daddy. FOR 05-20 TOYOTA TACOMA DOUBLE CAB CHROME 3 SIDE STEP NERF BAR RUNNING BOARD. Nerf bars were originally designed to protect vehicles from lower body damage, but they have evolved to serve other purposes as well. Many truck and SUV owners want Nerf bars just for the way they look these sleek, tubular side bars make a stylish statement on almost any rig. These Nerf bars also function as side steps, creating an easier and safer entry point into the truck / SUV. Built From Durable, Rust-Resistant, Stainless Steel. Large Slip-Resistant Step Pads. Easy, No-Drill Installation Bolts Right To Factory Mounting Points In Less Than An Hour (Most Models). High Strength Mounting Bracket; Holds up to 500 lbs. Vehicle Specific Mounting Brackets Included. 3 Diameter Steel Tubing. 2 X Stainless Steel Nerf Step Bars. Hardware as Shown in the Picture Above. 05-20 Toyota Tacoma Double (Crew) Cab. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 05-20 TOYOTA TACOMA DOUBLE CAB CHROME 3 SIDE STEP NERF BAR RUNNING BOARD” is in sale since Saturday, June 11, 2016. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Running Boards & Step Bars”. The seller is “speed_daddy” and is located in City of Industry, CA. This item can be shipped worldwide.

Brand: Speed Daddy
Type: Nerf Bar, Running Board
Placement on Vehicle: Front
Manufacturer Part Number: SDD-STEPB3042SS
Color: Metallic
Finish: Polished Chrome
Interchange Part Number: SDD-STEPB3042SS
Material: Stainless Steel / ABS Plastic
Superseded Part Number: SDD-STEPB3042SS
California Prop 65 Warning: This product contains chemicals known to the State.
Instruction Included: Yes
Tubing Diameter: 3″

07-16

For 07-16 Toyota Tundra/sequoia Stainless Steel Bull Bar Push Bumper Grill Guard

Posted on October 13, 2021 by admin | Comments Off

For 07-16 Toyota Tundra/sequoia Stainless Steel Bull Bar Push Bumper Grill Guard

Welcome to Speed Daddy. FOR 07-16 TOYOTA TUNDRA/SEQUOIA STAINLESS STEEL BULL BAR PUSH BUMPER GRILL GUARD. As a safety feature, traditional bars are built to protect the vehicle, which is considered less safe than allowing controlled deformation to absorb kinetic energy during a collision. Modern design of bullbars and roo bars has advanced so a bullbar is design to fit in the front of a vehicle to protect it and its passengers from damage in a collision with objects and animals. Made of Lightweight Polished SUS-304 Stainless Steel for Strength and Durability. Powder Coated mounting Brackets. Protects Vehicle Front End from Minor Impacts. 3 Enlarged Diameter Tubing with Seamless Welding Construction for Extra Reinforcement. Pre-Drilled for Auxiliary Light Mounting. Bolt-On Design with Complete Mounting Kits for Ease of Installation. 1 X Stainless Steel Bull Bar Grille Guard. Hardware as Shown in the Picture Above. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 07-16 TOYOTA TUNDRA/SEQUOIA STAINLESS STEEL BULL BAR PUSH BUMPER GRILL GUARD” is in sale since Monday, January 16, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Grilles”. The seller is “speed_daddy” and is located in City of Industry, CA. This item can be shipped worldwide.

Brand: Speed Daddy
Placement on Vehicle: Front
Style: Round Tubing
Color: Metallic
Material: Stainless Steel
Manufacturer Part Number: SDD-BURB029SS
Finish: Polished Chrome
Interchange Part Number: SDD-BURB029SS
Superseded Part Number: SDD-BURB029SS
California Prop 65 Warning: This product contains chemicals known to the State.
Instruction Included: Yes
Please Note: Trimming may be required to properly install
Tubing Diameter: 3″

05-15

For 05-15 Toyota Tacoma Metallic 1.5 Push Bull Bar Bumper Grill Brush Guard

Posted on July 26, 2020 by admin | Comments Off

For 05-15 Toyota Tacoma Metallic 1.5 Push Bull Bar Bumper Grill Brush Guard

Welcome to Speed Daddy. FOR 05-15 TOYOTA TACOMA METALLIC 1.5 PUSH BULL BAR BUMPER GRILL BRUSH GUARD. Get real front bumper protection for your vehicle! These front bumper guards adds style and toughness to the car, making clear that it will stand its ground and protect your original plastic bumper from accidental scratches and dings caused by minor rear collisions with a shopping cart or a careless driver on a parking lot. 1.5 OD Diameter Main Bars. Pre-Drilled Holes for Front Mounted Fog Lights. Rubber Padding to Minimize Minor Impacts. 1 X Front Bumper Guard. 1 X Set of Mounting Brackets. Hardware as Shown in the Picture Above. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 05-15 TOYOTA TACOMA METALLIC 1.5 PUSH BULL BAR BUMPER GRILL BRUSH GUARD” is in sale since Wednesday, June 20, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Grilles”. The seller is “speed_daddy” and is located in City of Industry, CA. This item can be shipped worldwide.

Brand: Speed Daddy
Manufacturer Part Number: SDD-GRILLG072SS
Placement on Vehicle: Front
Fitment Type: Performance/Custom
Interchange Part Number: SDD-GRILLG072SS
Other Part Number: SDD-GRILLG072SS
Superseded Part Number: SDD-GRILLG072SS
Color: Metallic
Materials: Stainless Steel
Surface Finish: Polished
Instruction Included: Yes
Piping Diameter: 1.5″ OD

toyota

For 1993 1997 Toyota Corolla JDM Metallic Mesh Grille Touring Wagon AE100 AE101

Posted on August 26, 2019 by admin | Comments Off

For 1993 1997 Toyota Corolla JDM Metallic Mesh Grille Touring Wagon AE100 AE101

Front Mesh Grill Metallic Black Grille. FACTORY STYLE OE REPLACEMENT. FRONT MESH GRILL METALLIC (Touring Wagon Logo). The item is 100% brand new in original box. Professional installation is highly recommended. The item “For 1993 1997 Toyota Corolla JDM Metallic Mesh Grille Touring Wagon AE100 AE101″ is in sale since Friday, July 13, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Grilles”. The seller is “of_accessories” and is located in Miami, Florida. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Brand: JX ACCESSORIES
Non-Domestic Product: No
Modified Item: No
Fitment Type: Direct Replacement
Type: Grille
Warranty: 60 Day
Style: Mesh
Material: Stainless Steel
Placement on Vehicle: Front
Color: Black
Manufacturer Part Number: 7253
Custom Bundle: No
Surface Finish: Painted
Number of Pieces: 1

Stainless Steel Metal

Tag: toyota