03-07

For 03-07 Dodge Ram 1500 5.7l Stainless Steel Long Tube Exhaust Manifold Header

Posted on December 7, 2021 by admin | Comments Off

For 03-07 Dodge Ram 1500 5.7l Stainless Steel Long Tube Exhaust Manifold Header

Welcome to Speed Daddy. FOR 03-07 DODGE RAM 1500 5.7L STAINLESS STEEL LONG TUBE EXHAUST MANIFOLD HEADERS. Getting more air into your engine and more exhaust out is the key to a performance motor. That’s where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the backpressure that occurs in common exhaust manifolds. When cylinders don’t have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential. Made of High Quality T304 Stainless Steel Material. Inlet/ Outlet: 1.625″ OD / 3″ OD. 4-1 Long Tube Header Design. TIG Welded CNC Machine Flanges. 3″ to2.5″ Weldable Collector Flanges. 1 X Pair of Exhaust Manifold Headers (Left & Right). 1 X Pair of Weldable Collector Flanges (Left & Right). Hardware as Shown in the Picture Above. 03-07 Dodge Ram 1500 5.7L 2WD. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. The person that is purchasing this product makes the following representations and acknowledges and agrees to the following terms and conditions. This off-road race only product (“this Product”) is designed and intended for use in organized, amateur and professional racing events, but is limited to closed-course racing and open-course racing that is formally sanctioned by a recognized racing organization involving the motor vehicle in which it is installed (the “Vehicle”). It is not for use on public highways or roads nor is it for recreational off-road use other than solely for competition purposes. Use of this Product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws. The User warrants that this Product shall only be used in sanctioned closed-circuit events. That use of this Product may make the Vehicle unfit or unsafe for the purposes intended or for any purpose and cause personal injury, property damage or death. That the installation of this Product, improper installation of this Product, use of this Product with other components or failure to use this Product in conjunction with other components, could result in or cause personal injury, property damage or death. THIS PRODUCT IS FOR COMPETITION RACETRACK USE ONLY. ALL OTHER USES ARE CONTRARY TO FEDERAL LAW. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 03-07 DODGE RAM 1500 5.7L STAINLESS STEEL LONG TUBE EXHAUST MANIFOLD HEADER” is in sale since Friday, May 15, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: 304 Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: SDD-HDSDPU032WDLT
Color: Metallic
Interchange Part Number: SDD-HDSDPU032WDLT
Superseded Part Number: SDD-HDSDPU032WDLT
California Prop 65 Warning: This product contains chemicals known to the State.
Inlet / Outlet Diameter: 1.625″ / 3″
Flange Type: 3-Bolt

ford

For Ford Pickup/model Street Rod Small Block 289-302-351 Exhaust Manifold Header

Posted on November 20, 2021 by admin | Comments Off

For Ford Pickup/model Street Rod Small Block 289-302-351 Exhaust Manifold Header

Welcome to Speed Daddy. Tubing has been optimized for the Small Block Ford 289, 302 and 351 cubic inch engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability. Maximizing smoothest high exhaust air flow rate. TIG welded CNC machine flange. 2-Piece 4-1 Racing design(8-2-1). Increase high flow air, instantly gain 10 to 15 Hp. 1 x Header exhaust system. All necessary installation hardware. Does not work with stock clutch linkage. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR FORD PICKUP/MODEL STREET ROD SMALL BLOCK 289-302-351 EXHAUST MANIFOLD HEADER” is in sale since Monday, August 4, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: SDD-HDSSBFCHA
Color: Metallic
Interchange Part Number: SDD-HDSSBFCHA
Superseded Part Number: SDD-HDSSBFCHA
California Prop 65 Warning: This product contains chemicals known to the State.
Installation Note: Does not work with stock clutch linkage
Header Inlet / Outlet Size (IN): 1.325″ / 2.375″

97-14

For 97-14 Small Block V8 Ls1/ls2/ls3/ls6 Lsx Exhaust Manifold Drag Racing Header

Posted on November 11, 2021 by admin | Comments Off

For 97-14 Small Block V8 Ls1/ls2/ls3/ls6 Lsx Exhaust Manifold Drag Racing Header

Welcome to Speed Daddy. FOR 97-14 SMALL BLOCK V8 LS1/LS2/LS3/LS6 LSX EXHAUST MANIFOLD DRAG RACING HEADER. They are meant to either be forward mounted as part of a turbocharger system or for Off-Road Trucks, Buggies or Boats. The design will put the headers collector flange into the factory firewall if mounted rearward. Where the primary tubes meet the collector is even with the back of the engine block. The collector extends back an additional 6.75. Make sure to take measurements before ordering this header. Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability. Maximizing smoothest high exhaust air flow rate. TIG welded CNC machine flange. 2-Piece 4-1 Racing design(8-2-1). Increase high flow air, instantly gain 10 to 15 Hp. Inlet / Outlet: 1.76″ / 2.89″. 1 x Header exhaust system. All necessary installation hardware. Universal turbo manifold fits LS1, LS2, LS3, LS4, LS6, LSX V8 engines. Compatibility chart is for Engine Reference Only. Exhaust fabrication / Welding is required. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 97-14 SMALL BLOCK V8 LS1/LS2/LS3/LS6 LSX EXHAUST MANIFOLD DRAG RACING HEADER” is in sale since Tuesday, August 5, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: SDD-HDSLS1LS6LSXV8
Color: Metallic
Interchange Part Number: SDD-HDSLS1LS6LSXV8
Superseded Part Number: SDD-HDSLS1LS6LSXV8
California Prop 65 Warning: This product contains chemicals known to the State.
Header Inlet / Outlet Size (IN): 1.76″ / 2.89″

shorty

Ss Shorty Exhaust Manifold Header Extractor 05-10 Mustang Gt/shelby 4.6l 281 V8

Posted on November 8, 2021 by admin | Comments Off

Ss Shorty Exhaust Manifold Header Extractor 05-10 Mustang Gt/shelby 4.6l 281 V8

Welcome to Speed Daddy. SS SHORTY EXHAUST MANIFOLD HEADER EXTRACTOR 05-10 MUSTANG GT/SHELBY 4.6L 281 V8. Our 4-1 Shorty Style off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.6L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Made of high quality T-304 stainless steel material. TIG welded CNC machine flange. O2 sensor bung insertion; Metal gasket included. 2-Piece 4-1 Racing design(8-2-1). Increase high flow air, instantly gain 10 to 15 Hp. 1 x Set of exhaust header. All necessary hardware, bolts, and gaskets. 05-10 Ford Mustang GT 4.6L V8. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “SS SHORTY EXHAUST MANIFOLD HEADER EXTRACTOR 05-10 MUSTANG GT/SHELBY 4.6L 281 V8″ is in sale since Wednesday, April 16, 2014. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: SDD-HDSFM0546LSHORTY
Color: Metallic
Interchange Part Number: SDD-HDSFM0546LSHORTY
Superseded Part Number: SDD-HDSFM0546LSHORTY
California Prop 65 Warning: This product contains chemicals known to the State.
Header Inlet / Outlet Size (IN): 1.625″ x 1.75″ (Oval) / 2.25″

84-91

For 84-91 Gmt Sbc C/k 5.0 5.7 V8 8-2 Stainless Long Tube Exhaust Header Manifold

Posted on November 4, 2021 by admin | Comments Off

For 84-91 Gmt Sbc C/k 5.0 5.7 V8 8-2 Stainless Long Tube Exhaust Header Manifold

Welcome to Speed Daddy. FOR 84-91 GMT SBC C/K 5.0 5.7 V8 8-2 STAINLESS LONG TUBE EXHAUST HEADER MANIFOLD. Our long tube 4-1 off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 5.0L(305) and 5.7L(350ci) engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. Maximizing Smoothest High Exhaust Air Flow Rate. TIG Welded CNC Machine Flange. 2-Piece 4-1 Racing Specs Design (8-2-1). Increase High Flow Air, Instantly Gain 10 -15 Hp. 1.25″ Inlet, 3.00″ Outlet. Bolts and Metal Gasket Included. 1 x Stainless Steel Header Exhaust. 73-86 Chevy C10 Suburban. 73-86 Chevy C20 Suburban. 73-86 Chevy K10 Suburban. 73-86 Chevy K20 Suburban. Fits Small Block V8 Motors. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR 84-91 GMT SBC C/K 5.0 5.7 V8 8-2 STAINLESS LONG TUBE EXHAUST HEADER MANIFOLD” is in sale since Thursday, June 21, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: SDD-HDSCC63
Color: Metallic
Interchange Part Number: SDD-HDSCC63
Superseded Part Number: SDD-HDSCC63
California Prop 65 Warning: This product contains chemicals known to the State.
Header Inlet / Outlet Size (IN): 1.25″ / 3″
Please Note: Collector reducer transitions to a 2.5″ outlet

90-95

Fit 90-95 4Runner/Pickup 2Wd 22R-E Stainless Long-Tube Header Exhaust Manifold

Posted on November 2, 2021 by admin | Comments Off

Fit 90-95 4Runner/Pickup 2Wd 22R-E Stainless Long-Tube Header Exhaust Manifold

Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.4L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i. Maximizing Smoothest High Exhaust Air Flow Rate. High Performance Long Tube Racing Spec. Design, Produces the Most Top End Power. Offers the Best Flow Characteristics for the Engine at High Engine Speeds. Increase High Flow Air, Instantly Gain 10 -15 Hp. Inlet/ Outlet: 1-1/2″ OD / 2-1/4″ OD. 16 gauge wall piping. TIG Welded CNC Machine Flange. 10mm thick Header Flange. 1 x Set of Exhaust Headers. Hardware as Shown in the Picture Above. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. We’d love to hear from you! We stand behind the products we sell. Please inspect all your order(s) upon receipt. All return items MUST be in brand new condition which means the item is never installed and kept in the original packaging. All items are brand new unless otherwise stated. PROFESSIONAL installation is highly recommended. The item “Fit 90-95 4Runner/Pickup 2Wd 22R-E Stainless Long-Tube Header Exhaust Manifold” is in sale since Wednesday, August 16, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “dptmotorsport” and is located in Texas, TX. This item can be shipped worldwide.

Brand: DPT Motorsports
Material: T-304 Full Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: DPT-HDS4RUNNER9024L
Color: Metallic
Interchange Part Number: DPT-HDS4RUNNER9024L
California Prop 65 Warning: This product contains chemicals known to the State.
Surface Finish: Chrome Polished Stainless Steel
Installation Note: For offroad use only
Header Inlet / Outlet Size (IN): 1-1/2″ OD / 2-1/4″ OD
Outlet Type: Slip on / Flanged
Restricted States: California, Maine, New York

long

SS Long Tube Tri-Y Exhaust Header Manifold for 64-70 Ford Mustang 5.0 260-302 V8

Posted on November 2, 2021 by admin | Comments Off

SS Long Tube Tri-Y Exhaust Header Manifold for 64-70 Ford Mustang 5.0 260-302 V8

Genuine Auto Parts and Accessories – Pick Your Favorite One! Our entire product line of exhaust manifold is designed to produce maximum street performance in stock or mildly modified engines. These headers are precision machined from durable 16-gauge 304 stainless steel, providing excellent resistance to corrosion, heat and the elements in any environment. They feature mandrel-bent primary tubing for increased flow to let your engine really breathe. Unleash your vehicle’s full potential, feel the increase in power when you stomp on the gas and get pushed back against the seat, hear the exhaust notes rumble and turns into a roar when you accelerate. Polished 304 stainless steel construction. Mandrel-bent tubing for smooth exhaust flow. Lightweight & sturdy 16 gauge tubing. TIG welded CNC machine flanges. Premium gaskets and all hardware included. Fits manual transmissions using 10″ or 10.5″ clutch only. 1968-up bellhousings require drivers side header clearance. Non-HiPo cars with manual transmission may need header clearance for clutch linkage. 2.5″ to 2″ Weldable reducer included. Installation instruction is not included. You may also like. Browse All The Related Products. SS Full Length Exhaust Header Manifold for 64-70 Ford Mustang 260/289/302/351. SS Exhaust Header Manifold for 62-77 260-302 V8 Falcon/Mustang/Cougar/Maverick. Professional quality control ensure our products meet your satisfaction. Our Team Is Here For You 24/7! For questions about an order or any of our products. Get all the latest news, updates and special offers about our store. The item “SS Long Tube Tri-Y Exhaust Header Manifold for 64-70 Ford Mustang 5.0 260-302 V8″ is in sale since Friday, July 27, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “motor-1″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

Brand: Motor-1
Material: 304 Stainless Steel
Placement on Vehicle: Front
Manufacturer Part Number: MT1-YT46MFSDH
Color: Metallic
California Prop 65 Warning: This product contains chemicals known to the State.
Fitment Type: Performance/Custom
Package Include: Necessary bolts/studs & gaskets
Surface Finish: Polished
Size: 2.5 in. / 2 in. Reducers
Inlet Diameter: 1.5 in.
Outlet Diameter: 2.5 in.
Type: Exhaust Manifold
Mounting Hardware Included: Yes
Mounting Style: 3 Bolt
Item Length: Full Length / Long Tube
Restricted States: California, Maine, New York

2x4-1

2×4-1 Stainless Header Tubular Exhaust Manifold For Chevy/gmc Silverado/sierra

Posted on October 24, 2021 by admin | Comments Off

2x4-1 Stainless Header Tubular Exhaust Manifold For Chevy/gmc Silverado/sierra

Welcome to Speed Daddy. 2X4-1 STAINLESS HEADER TUBULAR EXHAUST MANIFOLD FOR CHEVY/GMC SILVERADO/SIERRA. Our 4-1 Shorty Style off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.8L and 5.3L engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. High Performance Stainless Steel Header Exhaust. Made of High Quality T304 Stainless Steel Material. TIG Welded CNC Machine Flange. Direct Bolt-On Installation, Requires NO Modification. EGR Fitting and Metal Gasket Included. Increase High Flow Air, Instantly Gain 10 -15 Hp. Professional Installation is Highly Recommended (No Instruction Included). 1 X Set of Header Exhaust System. Hardware as Shown in the Picture Above. 00-04 GMC Yukon XL 1500. 02-05 Chevy Avalanche 1500. 99-05 Chevy Silverado 1500. 00-04 Chevy Suburban 1500. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “2X4-1 STAINLESS HEADER TUBULAR EXHAUST MANIFOLD FOR CHEVY/GMC SILVERADO/SIERRA” is in sale since Thursday, January 19, 2012. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Manufacturer Part Number: SDD-HDSCC99SHORTYA
Placement on Vehicle: Front
Color: Metallic
Interchange Part Number: SDD-HDSCC99SHORTYA
Superseded Part Number: SDD-HDSCC99SHORTYA
California Prop 65 Warning: This product contains chemicals known to the State.

ls1-ls6

For Ls1-ls6 Lsx 5.3/5.7/6.0/6.2 3v-band Stainless Steel Turbo Exhaust Manifold

Posted on October 18, 2021 by admin | Comments Off

For Ls1-ls6 Lsx 5.3/5.7/6.0/6.2 3v-band Stainless Steel Turbo Exhaust Manifold

Welcome to Speed Daddy. FOR LS1-LS6 LSX 5.3/5.7/6.0/6.2 3V-BAND STAINLESS STEEL TURBO EXHAUST MANIFOLD. They are meant to either be forward mounted as part of a turbocharger system or for Off-Road Trucks, Buggies or Boats. The design will put the manifolds collector flange into the factory firewall if mounted rearward. Where the primary tubes meet the collector is even with the back of the engine block. The collector extends back an additional 6.75. Make sure to take measurements before ordering these manifolds. Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i. Maximizing Smoothest High Exhaust Flow Rate. High Performance 2-Piece Racing Design. TIG Welded CNC Machine Flange for Strength and Durability. Increase High Flow Air, Instantly Gain 10 to 15 Hp. Inlet / Outlet: 1.76″ OD/ 2.89″ OD. 1 X Pair of Turbo Manifolds. Installation Hardware as Shown. SBC LS1 LS2 LS3 LS4 LS6 LSX V8 Engines. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “FOR LS1-LS6 LSX 5.3/5.7/6.0/6.2 3V-BAND STAINLESS STEEL TURBO EXHAUST MANIFOLD” is in sale since Friday, December 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Manufacturer Part Number: SDD-TMLS1LS6LSX
Color: Metallic
Finish: Polished
Interchange Part Number: SDD-TMLS1LS6LSX
Superseded Part Number: SDD-TMLS1LS6LSX
California Prop 65 Warning: This product contains chemicals known to the State.
Please Note: Fits GM SBC LS1 LS2 LS3 LS4 LS6 LSX Engines Only
Exhaust (Turbo Manifold) Flange: 3″ V-Band
Exhaust Inlet / Outlet: 1.76″ OD/ 2.89″ OD

racing

Racing Ss Long-tube Header Exhaust Manifold For 94-04 Mustang Sn95 3.8l V6 Pony

Posted on October 16, 2021 by admin | Comments Off

Racing Ss Long-tube Header Exhaust Manifold For 94-04 Mustang Sn95 3.8l V6 Pony

Welcome to Speed Daddy. RACING SS LONG-TUBE HEADER EXHAUST MANIFOLD FOR 94-04 MUSTANG SN95 3.8L V6 PONY. Our 3-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 3 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 3.8L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound. High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. Maximizing Smoothest High Exhaust Air Flow Rate. 3-1 High Performance Long Tube Racing Spec. Design, Produces the Most Top End Power. Offers the Best Flow Characteristics for the Engine at High Engine Speeds. Increase High Flow Air, Instantly Gain 10 -15 Hp. Inlet/ Outlet: 1-5/8″ OD / 2-5/8″ OD. Requires use of aftermarket Y-pipe. 16 gauge wall piping. TIG Welded CNC Machine Flange. O2 bungs and Metal Gaskets Included. 10mm thick Header Flange. Without front Air injection Ports. 1 x Set of Exhaust Headers. Hardware as Shown in the Picture Above. 94-04 Ford Mustang 3.8L V6. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. Video will open in a new window. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. The item “RACING SS LONG-TUBE HEADER EXHAUST MANIFOLD FOR 94-04 MUSTANG SN95 3.8L V6 PONY” is in sale since Monday, May 27, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exhaust & Emission Systems\Manifolds & Headers”. The seller is “speed_daddy” and is located in Texas, TX. This item can be shipped worldwide.

Brand: Speed Daddy
Material: T-304 Full Stainless Steel
Manufacturer Part Number: SDD-HDSFM9438L
Placement on Vehicle: Front
Color: Metallic
Interchange Part Number: SDD-HDSFM9438L
Superseded Part Number: SDD-HDSFM9438L
California Prop 65 Warning: This product contains chemicals known to the State.
Installation Note: Does NOT Fit Models with EGR on Air Injection System
Header Inlet / Outlet Size (IN): 1-5/8″ OD / 2-1/2″ OD

Stainless Steel Metal

Tag: manifold