150mm

6 150mm HETAS Approved Flexible Flue Liner Installation Kit and Hanging Cowl

6_150mm_HETAS_Approved_Flexible_Flue_Liner_Installation_Kit_and_Hanging_Cowl_01_gdxy
6 150mm HETAS Approved Flexible Flue Liner Installation Kit and Hanging Cowl

6 150mm HETAS Approved Flexible Flue Liner Installation Kit and Hanging Cowl
6 (150mm) HETAS Approved Flexible Liner and Installation Kit with H anging Cowl. Common problems including insufficient draw to power the stove, lack of heat output and leaking tar/smoke can all be rectified by re-lining the chimney with a Flexible Chimney Liner; an essential product when installing into an existing fireplace and chimney. By ensuring a sealed chimney from stove to terminal, your stove can only then operate to its full potential. Flexible Liner and associated parts for 6 outlet wood burning and multifuel stoves. This kit consists of. 6″ Single Wall Pipe to 6″ Flexible Liner Adapter. Required length of 6 316 Grade twin-skinned Flexible Liner. 6 Stainless or Terracotta Hanging Cowl for installations with a chimney pot. Basic Instructions – Secure hanging Cowl onto top end of liner using straps provided, drop liner down length of chimney and secure cowl on the pot with longer strap. Part: 6 (150mm) Liner & Installation Kit. Finish: Stainless or Terracotta (Cowl). Approvals: HETAS and CE. Grade of Liner: 316/316. Liner Designation: EN1856-2 T600 N1 W Vm L70012 G. Thickness of Liner: 0.10mm. Fuels: All Solid Fuels, Gas & Oil. Flexible Liner components are listed by the internal diameter of the Flexible Liner they are compatible with and are manufactured for use with Flexible Chimney Liners only. We take no responsibility for sizing if used for any other application. Regrettably, bespoke tailor-made products such as Flexible Chimney Liner are non-returnable. We will be more than happy to help you and provide any technical advice you need relating to your installation. This item is in the category “Home, Furniture & DIY\Fireplaces & Stoves\Heating Stoves”. The seller is “planetstoves” and is located in this country: GB. This item can be shipped to United Kingdom.
  • Flue Length: 7m
  • Cowl Options: Stainless Steel
  • Custom Bundle: No
  • Product: Flue Kit
  • Sub-Type/ Material: 316 Stainless Steel
  • Item Length: Various
  • Smart Home Compatibility: Not Applicable/Not Available
  • Fuel Type: Various
  • Colour: Silver
  • BTU Heating Rating: Various
  • Item Height: Various
  • Room: Any Room
  • Item Width: Various
  • EC Range: A – G
  • Material: Stainless Steel
  • Item Depth: Various
  • Brand: Quattro SS
  • Type: Wood Burning Stoves
  • Assembly Required: No
  • Model: Various
  • Energy Efficiency Rating: A
  • Country/Region of Manufacture: United Kingdom
  • Including: Flexable Chimney Flue liner
  • Item Weight: Various

6 150mm HETAS Approved Flexible Flue Liner Installation Kit and Hanging Cowl
high

High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator

High_Temperature_Inline_Extractor_Fan_150mm_Chimney_Flue_Liner_Ventilator_01_spym
High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator
High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator
High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator
High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator

High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator
High Temperature Inline Extractor Fan 150mm. A stainless steel duct fan for operation in difficult conditions. The sensational German engine with extremely high parameters places this product in the first quality class. The best possible parameters have been selected in the presented model. Small size, the low noise level in comparison with high efficiency allows the installation of these devices in virtually any room. Temperature resistant motor with ball bearing. The use of a ball bearing allows the fan to be mounted in any position (wall, ceiling, or inclined) without affecting its parameters. The fan motor is adapted to work in high temperatures (up to 70 o C). Operating temperature: -40°C – +70°C. Static Pressure: 147 Pa. Estimated time of work: 50000h. This item is in the category “Home, Furniture & DIY\Heating, Cooling & Air\Air Quality & Fans\Extractor Fans”. The seller is “prostkoltd” and is located in this country: GB. This item can be shipped worldwide.
  • Colour: Silver
  • Ventilation System: Extractor Fan
  • Type: Inline
  • Brand: Prostko Ltd
  • Material: Metal, Stainless Steel
  • Features: Duct, Ducting, Ventilator, Air Blower, Extract
  • Item Diameter: 6 in
  • EAN: DoesNotApply

High Temperature Inline Extractor Fan 150mm Chimney Flue Liner Ventilator