stainless

Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends

Stainless_steel_wallrail_metal_bannister_handrail_grab_rail_with_grooved_ends_01_jfz
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends

Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends. Stainless Steel Handrails (some people call this chrome). High quality fitted multi-grooved end caps. See sizing guide for quantity of brackets per handrail size. Careful as some of our competitors are putting just two brackets on a 3.5m rail!!!!!! All sizes up to 3.5metres will be made in 1 length, larger sizes will have 2 sections and an internal joint. Made to any size you require – listed in 0.5m increments. Heavy duty and robust 42mm tubular rails. Extremely easy to fit. Quick turnaround times, even on bespoke items. All fixings are stainless steel – included. All produced in Sheffield by DioMet. Straight runs as standard but we fabricate cranks, bends, turn downs etc. Stainless steel polished to 320grit minimum giving the highest standard finish. All items are handmade so if you need a particular size not listed, simply get in touch. Examples of our other listings. The item “Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends” is in sale since Wednesday, June 28, 2017. This item is in the category “Home, Furniture & DIY\DIY Materials\Stairs”. The seller is “diometfabs” and is located in SHEFFIELD, South Yorkshire. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: United Kingdom
  • MPN: Does Not Apply
  • Brand: DioMet
  • Metal Type: Stainless steel brushed finish
  • Wall fixings: Included

Stainless steel wallrail / metal bannister handrail /grab rail with grooved ends
stainless

Stainless Steel Male Steel Fist Mitt with Locks UK BASED POST METAL/GOTH

Stainless_Steel_Male_Steel_Fist_Mitt_with_Locks_UK_BASED_POST_METAL_GOTH_01_hq
Stainless Steel Male Steel Fist Mitt with Locks UK BASED POST METAL/GOTH

Stainless Steel Male Steel Fist Mitt with Locks UK BASED POST METAL/GOTH
Hello and welcome to my listing. Luxury Stainless Steel Bondage HEAD CAGE/BALL with locks and fist balls with locks. Dont get ripped off by cheaper belts that break after a few wears, poor quality items that dont match the picture, Rivets that break leaving the belt useless, sellers who say there in the UK and Europe but their business address is in China or Keys that snap leaving the wearer in the belt. YES, ALL THOSE POINTS ARE BASED ON MESSAGES WE HAVE GOT FROM OUR CUSTOMERS. ALL Our products, are selected by us for their quality and affordability and we are very proud to sell them, We have been to trade shows and handled every item we sell! We guarantee you will get the product that is in our picture. We only send items out that we are happy to get our selfs. THESE DEVICES ARE High Quality 100% Steel They will fit 99% of people! The head ball is. Neck area: 103.86cms. Neck Diameter: 11.5cms. Neck Circumference: 36.12cms. Ball area: 572.55cms. Ball Circumference: 84.82cms. The hand balls are. The maximal inside diameter is 7.0 cm. Ball diameter is 12.0 cm. If you need to return this item. The item “Stainless Steel Male Steel Fist Mitt with Locks UK BASED POST METAL/GOTH” is in sale since Monday, February 1, 2016. This item is in the category “Everything Else\Other”. The seller is “design_by_extreme” and is located in Goole. This item can be shipped worldwide.
Stainless Steel Male Steel Fist Mitt with Locks UK BASED POST METAL/GOTH
115mm

50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc

50_x_115mm_Thin_metal_cutting_discs_stainless_steel_slitting_discs_cut_off_disc_01_dff
50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc

50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc
Safety Gloves, Work Gloves. Hard Hats, Ear defenders. Tool Boxes, Tool Bags, Chests. Power Tools and accesories. Car and Van accesories. Security Chains, Padlocks, etc. Nuts, Bolts Assortment Packs. Grinding / Cutting Discs. Spill Protection & Absorbants. 50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc. 115 x 1.2 x 22.2mm Metal Cutting Discs. These&###xA0;thin profile discs cut faster and cleaner. Ideal for stainless and car body panel work. Suitable for all 115mm Angle grinders. Max RPM 13,300. VAT included in the price and invoice sent with item. R&C Direct is the online sales division of well esablished R & C Components Ltd who have been trading in Hull for over 25 years supplying the engineering and Marine trade along the Docks and surrounding areas. We look to give a nationwide service with a local business mentality. Helping anyone out where we can. We are now specailising in Tool Boxes, Hand Tools, Power tools, janitorial products, paper disposables (centrefeed rolls, toilet rolls etc), abrasives, fixings & fastners, Safety Footwear, High Visibilty work wear and PPE such as safety Glasses, dust masks, hard hats and bump caps etc. We also have a full range of spill protection products available such as full response kits to individual boxes of oil/chemical spill pads and absorbent booms (sausages). We carry large stocks and anything we don’t carry is usually available on a next day basis. We like to think there is nothing we can’t supply. If you need it we’ll get it! PLEASE READ ALL BELOW TO SAVE DELAY IN ITEMS BEING DISPATCHED. IF YOU ARE IN THE SCOTTISH HIGHLANDS PLEASE SEE BELOW IF YOUR POST CODE IS CLASSED AS HIGHLANDS OR A REMOTE AREA! SURCHARGES WILL APPLY TO THE FOLLOWING ISLES AND POST CODES AB30-38, AB44-56, FK17-99, G83, IV1-28, IV30-39, IV52-54, PH31-41, PH49-50, HS1-9, IV40-51, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3 ALSO OFFSHORE ISLES: SHETLAND ISLES, ISLE OF MAN, WESTERN ISLES, SCILLY ISLES, CHANNEL ISLES OR ANOTHER NOT ATTACHED TO MAINLAND UK. NORTHERN ISLAND BT POST CODES WILL ALSO CARRY A SURCHARGE. These deliveries can not give a specific date or time this is due to the couriers way of operating. All our Goods are Brand New and not used unless otherwise stated. Add to Favourite Sellers. Sign up to Newsletter. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc” is in sale since Saturday, July 13, 2013. This item is in the category “Business, Office & Industrial\Power Tools\Grinders\Grinder Blades/Discs”. The seller is “rc_components” and is located in Hull. This item can be shipped to United Kingdom.
  • MPN: Does Not Apply
  • Brand: Unbranded/Generic

50 x 115mm Thin metal cutting discs, stainless steel slitting discs cut off disc
glass

Glass Balustrade / Stainless Steel Balustrade

Glass_Balustrade_Stainless_Steel_Balustrade_01_xey
Glass Balustrade / Stainless Steel Balustrade
Glass Balustrade / Stainless Steel Balustrade
Glass Balustrade / Stainless Steel Balustrade
Glass Balustrade / Stainless Steel Balustrade
Glass Balustrade / Stainless Steel Balustrade

Glass Balustrade / Stainless Steel Balustrade
Prices based per metre without handrail. Glass and stainless steel balustrade finished height 1100mm. Steel is 316 Marine grade. 10mm toughened glass with polished edges. All glass is British standards kite marked. 42.4 stainless steel tub brushed finished. Glass clamps to suit 10mm glass. Please feel free to contact with sizes. All photos are work we have carried out our selfs with our own products. Aztec glass 01656 857131. 07535536792 please leave message if no answer will return call ASAP. We also offer this product with a handrail. We also offer a fitting service please enquire for prices. Posts can be bought separate if you have a glass supplier near you please enquire. The item “Glass Balustrade / Stainless Steel Balustrade” is in sale since Sunday, September 9, 2018. This item is in the category “Garden & Patio\Garden Fencing\Railings”. The seller is “aztecglass” and is located in Bridgend. This item can be shipped to United Kingdom.
  • Material: Metal

Glass Balustrade / Stainless Steel Balustrade
stainless

Stainless steel flipper license plate anti camera flip EU revolving number frame

Stainless_steel_flipper_license_plate_anti_camera_flip_EU_revolving_number_frame_01_sope
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame
Stainless steel flipper license plate anti camera flip EU revolving number frame

Stainless steel flipper license plate anti camera flip EU revolving number frame
The most interesting and look expensive model of the flipper for your success. High quality material (1 mm thick stainless steel). Ideal for European license plates. Ideal for regions with high air humidity, because it is not subject to corrosion. Almost instantaneous switching (1.5 seconds). Reliability (work at the speed of 150 km / h). Stealthiness (this looks like an usual anti-vandal frame for a license plate). The new model (the mechanism that will work very long). It doesn’t require modification in the design of the car (only a small hole for the cable under the license plate). Ability to connect remote control. The set Includes one license plate frame flipper. This frame suitable for Euro size license plates (520 x 110 mm). License Plate Flipper can also be controlled and the remote control. It is lightweight and compact key fob, which is easy to carry. We will send you everything you need in electronic form and provide all the explanations. Specifications(Slim, ver 4.0). The size of the housing frame 555 x 145 x 16 mm. For the license plate size of 520 x 110 mm. Supply voltage range 12 V. 1 frame for the state number. The thickness of the frame is now only 16 mm (the old frame thickness 20 mm). Changeling looks like a normal anti-vandal metal frame. More flexible and soft braided rope – a minimum of friction losses in bending the rope and even more easy installation. Thicker and laminated rope means less friction. Bushings and plastic guides replaced by stainless steel castors – means no rope frays at points of contact. The vertical guides on which the moving license plate, replaced by a rail system – it means the absence of misalignment and wedge mechanism from dirt. The cutouts on the back of the frame – makes it easy to mount the frame, even to a rounded bumper. For more information about the License Plate Flipper Flips(Slim). License Plate Flipper Flips – is not nothing but a plate reverses. If you have 2 license plates – a regular and a name you will not have to change them with a. Pressing a button and some plates were replaced by others. This procedure does not require cutting into the bumper or the. Body of the car. The mechanism, flip plates, hidden behind a removable panel. This control key is located right in the car. Button set at any convenient place. Mechanism of Action and Design. Like all brilliant, the mechanism of action the License Plate Flipper Flips simple. As soon as you press the button, the frame is turned through 180 degrees, so that one license plate is replaced by another. The whole structure of the device is made of metal 1 mm thick, making it difficult to dismantle the plate. From this frame to remove the license plates at times harder than plastic. The construction is designed in such a way that it can work even when fully submerged in water. Using the License Plate Flipper Flips. Such a device is used if the car formalized 2 license plates. This function is only valid in the countries where it is required by law. License Plate Flipper Flips also installed on vehicles involved in various exhibitions, driving, auto shows and other sporting events. Most often it is practiced outside of public roads. Often the License Plate Flipper Flips set for official operative cars Interior Ministry, the CIA, FSB, etc. When installing the registration and the name of the license plate at the same time, this information should be written into the registration certificate! Remember that changing or concealing the license plate on a public road may result in administrative and even criminal liability. On installation and operation. The mechanism frames shifter is simple enough, but the self-installation requires skill and knowledge of the intricacies of the mechanism. Installation instructions not included because Installation is not universal and depends on each individual vehicle. Experienced master will understand how to install it directly on your vehicle. At the same time frame requires periodic maintenance – lubrication of rubbing parts 2-4 times a month in the summer and 6-10 times a month in the winter (or more often – depends on operating conditions). Before installation, be sure to lubricate the drive rope lubricant WD-40 sheds should be on the motor side. Remember that the rope is a consumable item. The item “Stainless steel flipper license plate anti camera flip EU revolving number frame” is in sale since Saturday, February 3, 2018. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Body & Exterior Styling\Other Exterior Styling”. The seller is “thebestrussianhandmade” and is located in Saint-Petersburg, Saint-Petersburg. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • License Plate: Flipper
  • Manufacturer Part Number: 3110-3730611
  • Colour: Metallic
  • Country/Region of Manufacture: Russian Federation
  • Placement on Vehicle: Front
  • Brand: Lepse

Stainless steel flipper license plate anti camera flip EU revolving number frame
t-rex

T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting

T_Rex_8_Wide_Wet_Stainless_Steel_Sand_Scoop_with_3_8_Holes_for_Metal_Detecting_01_yfe
T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting

T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting. Batteries, Chargers & Cables. Books & Reference Material. Carry Bags, Pouches & Covers. Digging & Recovery Tools. Gold Pan & Classifier. Scoops & Diving Tools. T-Rex 8 Wide Stainless Steel Scoop. This durable sand scoop is ideal for metal detecting on the beach, in wet or dry sand! This is the new and improved T-REX, we have added extra tact welds to the top plate where the handle tube mounts to the re-enforced top plate of the scoop. A Gusset has been added to the front of the handle tube to add rigidity and prevent flexing of the top plate. These improvements will add rigidity and overall strength to the T-REX Scoop. The T-REX bucket is approximately 11 long by 8 wide and 4 7/8 deep. The top of the scoop is 5 deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down handle. This also makes the scoop more balanced and feel lighter when hunting out of water. The 3/8 holes are punched close together to allow for quick sand release and catch those smaller targets that can be missed by larger 1/2 or 5/8 holes. There is no push plate on the back of the scoop for more control and better balance when pushing down into the sand. The gauge of the stainless steel is. 075 thick for the stress put on the scoop when digging in wet sand. The weight of the scoop is 3 lbs. On a postal scale (without the handle). Best of all it is made here in the U. I have hunted with the T-Rex sand scoop through its proto type period. The end result is, it is the best scoop I own. If the target requires a second scoop the T-Rex dumps easily allowing a second scoop to be taken before the next wave can cave in the hole. In the last year I have run this scoop through some really tough conditions. The T-Rex takes a big chunk out of wet the sand and most targets are recovered in one scoop. Steve D (aka BCNJ), Toms River, NJ. The T-Rex is an awesome scoop. I have had many people use the scoop and they all seem to like it. I have a few friends that have knee and back issues and they think it is a lot easier to use than any of the scoops they have used in the past. They like the flat back part of the scoop which is used to push the scoop into the ground instead of the small pads other scoops are using. This gives the scoop more stability when digging. Tim S, Gulf Coast Florida. Well built, lightweight, and strong! Bites hard, large bucket really grabs a load of sand! Drains fast in dry sand and in the surf!! Works great for me in our “wet cement” sand below the tideline!! Brian Mayer (aka Surfidigger). My new T-Rex is the scoop I reach for whether I’m hunting the dry sand or in the water. The design makes for fast, wide, deep and fast filtering of the sand. With the lightweight of the scoop I could carry this all day. Mike L, Cape May Courthouse, NJ. Must use a fiberglass or wooden handle only. Place handle into scoop with wood grain running from front to back of scoop, this allows for maximum support. Drill pilot hole into handle and insert screw, this secures the handle to the steel collar of the scoop. Listings for NEW Items. Listings for USED Items / Auctions. You have nothing to lose! We support our troops! We are located at. 3901 Bestech Road #100 Ypsilanti, MI 48197. Opening hours: Monday through Friday 8:30AM 5:00PM. Our reason for being is to help You find the Best Metal Detectors and Accessories that fit Your specific needs. It’s simple, we say NO to junk and make your Metal Detecting Experience GREAT. With Serious Detecting you know you will get high quality products and service without compromises. The item “T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting” is in sale since Wednesday, April 9, 2014. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detector Accessories”. The seller is “serious_detecting” and is located in Ypsilanti, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Czech republic, Finland, Hungary, Malta, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Barbados, Bolivia, Ecuador, Guadeloupe, Cayman islands, Peru, Paraguay, Reunion, Uruguay, Bulgaria, Latvia, Lithuania, Estonia, China, Thailand, Ukraine, Bahrain, Croatia, Jordan, Viet nam.
  • Brand: T-REX
  • Type: Digging Tool/Pan
  • Model: T-REX 8″ Wide Wet Stainless Steel Sand Scoop
  • MPN: SS-TR8W
  • Country/Region of Manufacture: United States
  • Bucket Depth: 4 7/8″
  • Bucket Length: 11″
  • Bucket Width: 8″
  • Handle Tube Angle: 20 Degrees
  • Hole Size: 3/8″
  • Material: Stainless Steel
  • Steel Gauge: .075
  • UPC: 009068001356
  • Weight (without handle): 3 lbs

T-Rex 8 Wide Wet Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
t-rex

T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting

T_Rex_9_5_Wide_Stainless_Steel_Sand_Scoop_with_3_8_Holes_for_Metal_Detecting_01_tmkp
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting

T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting. Batteries, Chargers & Cables. Books & Reference Material. Carry Bags, Pouches & Covers. Digging & Recovery Tools. Gold Pan & Classifier. Scoops & Diving Tools. T-Rex 9.5 Stainless Steel Sand Scoop. This durable sand scoop is ideal for metal detecting on the beach, in wet or dry sand! This is the new and improved T-REX, we have added extra tact welds to the top plate where the handle tube mounts to the re-enforced top plate of the scoop. A Gusset has been added to the front of the handle tube to add rigidity and prevent flexing of the top plate. These improvements will add rigidity and overall strength to the T-REX Scoop. The T-REX bucket is approximately 11 long by 9 1/2 wide and 4 7/8 deep. The top of the scoop is 5 deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down handle. This also makes the scoop more balanced and feel lighter when hunting out of water. The 3/8 holes are punched close together to allow for quick sand release and catch those smaller targets that can be missed by larger 1/2 or 5/8 holes. There is no push plate on the back of the scoop for more control and better balance when pushing down into the sand. The gauge of the stainless steel is. 075 thick for the stress put on the scoop when digging in wet sand. The weight of the scoop is 3.9 lbs. On a postal scale (without the handle). Best of all it is made here in the U. I have hunted with the T-Rex sand scoop through its proto type period. The end result is, it is the best scoop I own. If the target requires a second scoop the T-Rex dumps easily allowing a second scoop to be taken before the next wave can cave in the hole. In the last year I have run this scoop through some really tough conditions. The T-Rex takes a big chunk out of wet the sand and most targets are recovered in one scoop. Steve D (aka BCNJ), Toms River, NJ. The T-Rex is an awesome scoop. I have had many people use the scoop and they all seem to like it. I have a few friends that have knee and back issues and they think it is a lot easier to use than any of the scoops they have used in the past. They like the flat back part of the scoop which is used to push the scoop into the ground instead of the small pads other scoops are using. This gives the scoop more stability when digging. Tim S, Gulf Coast Florida. Well built, lightweight, and strong! Bites hard, large bucket really grabs a load of sand! Drains fast in dry sand and in the surf!! Works great for me in our “wet cement” sand below the tideline!! Brian Mayer (aka Surfidigger). My new T-Rex is the scoop I reach for whether I’m hunting the dry sand or in the water. The design makes for fast, wide, deep and fast filtering of the sand. With the lightweight of the scoop I could carry this all day. Mike L, Cape May Courthouse, NJ. Must use a fiberglass or wooden handle only. Place handle into scoop with wood grain running from front to back of scoop, this allows for maximum support. Drill pilot hole into handle and insert screw, this secures the handle to the steel collar of the scoop. Listings for NEW Items. Listings for USED Items / Auctions. You have nothing to lose! We support our troops! We are located at. 3901 Bestech Road #100 Ypsilanti, MI 48197. Opening hours: Monday through Friday 8:30AM 5:00PM. Our reason for being is to help You find the Best Metal Detectors and Accessories that fit Your specific needs. It’s simple, we say NO to junk and make your Metal Detecting Experience GREAT. With Serious Detecting you know you will get high quality products and service without compromises. The item “T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting” is in sale since Wednesday, April 9, 2014. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detector Accessories”. The seller is “serious_detecting” and is located in Ypsilanti, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Czech republic, Finland, Hungary, Malta, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Uruguay, Bulgaria, Latvia, Lithuania, Estonia, China, Thailand, Ukraine, Bahrain, Croatia, Barbados, Bolivia, Ecuador, Guadeloupe, Jordan, Cayman islands, Peru, Paraguay, Reunion, Viet nam.
  • Brand: T-REX
  • Type: Digging Tool/Pan
  • Model: T-REX 9.5″ Wide Wet Stainless Steel Sand Scoop
  • MPN: SS-TR9.5W
  • Country/Region of Manufacture: United States
  • Bucket Depth: 4 7/8″
  • Bucket Length: 11″
  • Bucket Width: 9.5″
  • Handle Tube Angle: 20 Degrees
  • Hole Size: 3/8″
  • Material: Stainless Steel
  • Steel Gauge: .075
  • UPC: 009068001363
  • Weight (without handle): 3.9 lbs

T-Rex 9.5 Wide Stainless Steel Sand Scoop with 3/8 Holes for Metal Detecting
invicta

NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch

NEW_Invicta_Bolt_Zeus_Twisted_Metal_Retrograde_Chrono_Caged_Dial_Stainless_Watch_01_vfm
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch

NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
Invicta Mens Swiss Made Twisted Metal 8040. N Retrograde Day Chronograph Bolt Zeus. Brand New with Tag in Invicta Box with Paper work & Plastic Wrapped. HERE AVAILABLE AT SURPRISINGLY VERY LOW PRICE… WOULD BE AN EXCELLENT PIECE FOR YOUR LOVE ONE… GRAB IT BEFORE SOMEONE ELSE… We Are Authorized Invicta Dealer. Invicta Watches has a long story beginning in 1837 in Switzerland. La Chaux-de-fonds was the place where originally Raphael Picard began watchmaking business, making truly swiss – precise, reliable and beautiful watches, but at affordable prices. Invicta watches were well known and always in demand. Over a century Picard family successfully operated business creating famous prize-winning watches. Now Invicta watches bring not only swiss quality, but style and design that compete with any modern brand. Keeping prices in affordable range Invicta is favored by many celebrities and famous people. Set your schedule to cruise control with the bold, brash Reserve Bolt Zeus. Packed with power and designed with confidence, it tops your wrist in silver-tone and awesome, unexpected orange. Youll find a cage-like detail on the subdials of this Twisted Metal edition and carbon fiber that ensures durability day after day. Complete with luminous accents, its got all the green lights in its sights. Movement: Swiss Movement Ronda 8040. Movement Country of Origin: Switzerland. Case Material: Stainless steel. Dial Material: Carbon fiber, alloy. Crown: Screw down with function pushers. Complications: 12:00 – Retrograde, 3:00 – 1/10th-second, 6:00 – Perpetual seconds, date window and 9:00 – 30-minute. Bracelet Measurements: 8-1/4 L x 34mm W. Water Resistance: 20 ATM – 200 meters – 660 feet. AS DESCRIBED BRAND NEW, 100% AUTHENTIC (NO REPLICA AT ALL). ALL MEASUREMENTS ARE APPROXIMATE. PLEASE FEEL FREE TO CONTACT ME BEFORE LEAVING 1, 2 OR 3 STARS OR ANY BAD FEEDBACK. WE WILL NOT DECLARE LESSER VALUE IN THE CUSTOM FORM IN ANY CIRCUMSTANCES NOR WILL MARK THE ITEM AS GIFT. WE WILL DEFINITELY GO EXTRA MILES TO MAKE YOU HAPPY & EARN YOUR BUSINESS AND WE ASSURE YOU THAT YOU WILL BE OUR RETURN CUSTOMER. Return items should be in the same condition as sent to you (with all plastic wraps, paper works & tags). The item “NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch” is in sale since Friday, March 8, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Wristwatches”. The seller is “amazedaze” and is located in Katy, Texas. This item can be shipped worldwide.
  • Gender: Men’s
  • Model: Bolt Zeus
  • Modified Item: No
  • Watch Shape: Round
  • Case Color: Silver
  • With Booklet: Yes
  • Case Material: Stainless Steel
  • Movement: Swiss Made Ronda 8040.N Quartz Chronograph
  • With Original Packaging: Yes
  • Year of Manufacture: 2010-Now
  • MPN: 16315
  • Chronograph Type: Chronograph
  • Band Color: Silver & Orange
  • Age Group: Adult
  • Display: Analog
  • Lug Width: 34mm
  • Brand: Invicta
  • Manufacturer Warranty: 3 years
  • Seller’s Warranty: No
  • Case Size: 52mm
  • Face Color: White
  • Water Resistance: 200 Metres / 20 ATM
  • Style: Fashion, Sports, Luxury & Style
  • Caseback: Screwback Case
  • Dial Style: 12-Hour Dial
  • Extra Links: No
  • Band Material: Stainless Steel
  • Case Finish: Matte
  • Band Type: Bracelet/Link Band
  • Original Packaging Description: With Tags
  • Age: Modern (2000-present)

NEW Invicta Bolt Zeus Twisted Metal Retrograde Chrono Caged Dial Stainless Watch
sealey

Sealey AP855 Mobile Stainless Steel / Composite Tool Box 3 Compartment

Sealey_AP855_Mobile_Stainless_Steel_Composite_Tool_Box_3_Compartment_01_fes
Sealey AP855 Mobile Stainless Steel / Composite Tool Box 3 Compartment

Sealey AP855 Mobile Stainless Steel / Composite Tool Box 3 Compartment
Sealey AP855 Mobile Stainless Steel/Composite Tool Box – 3 Compartment. Fully mobile with 2 heavy-duty wheels and a retractable handle. Separates into three units. Top box with tote tray, has two strong clasps and padlock hasp. Middle box features two large pull out drawers. Base unit is an open top bin providing storage for larger items and can be secured by padlock (not included). Suitable for mechanics, tradesmen or DIY users. Overall Size (W x D x H): 540 x 350 x 840mm (Handle Retracted). BROWSE STORE BY BRAND. Credit / Debit card – please call 01303 852692 – dispatch to cardholder registered address only. Cheque / Bankers draft – goods dispatched once funds cleared (3-5 days) Bank transfer – please call 01303 852692 for more information. AB, BT, FK, GY, HS, IM, IV, KA, KW, PA, PH, ZE, all Islands excluding IOW. Orders are dispatched on one of the following services. (Details are within each listing). All customers should expect to receive their orders within 2-3 days maximum. The following postcodes may take an additional day. AB, BT, IV, KW, PA, PH, all Islands. FFX reserve the right to change the terms, set out above, at any time. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Sealey AP855 Mobile Stainless Steel / Composite Tool Box 3 Compartment” is in sale since Tuesday, June 3, 2014. This item is in the category “Home, Furniture & DIY\DIY Tools & Workshop Equipment\Tool Boxes & Storage\Other Tool Storage”. The seller is “folkestonefixings” and is located in Folkestone. This item can be shipped to European Union member countries.
  • Manufacturer: Sealey
  • Material: Metal
  • Type: Tool Boxes
  • Brand: Sealey
  • MPN: AP855
  • Weight: 15.65kg
  • Height: 87cm
  • Width: 59cm
  • Depth: 38cm

Sealey AP855 Mobile Stainless Steel / Composite Tool Box 3 Compartment